How Much Concrete Do I Need for Concrete Steps? Don't Count One Riser Per Step

Solid steps are not one riser high each — each step is a block one riser taller than the one before it. That is why steps need more concrete than most people guess.

The formula

Volume = tread × riser × n(n+1)/2 × width, all in feet, then ÷ 27 for cubic yards. Here n is the number of steps, and n(n+1)/2 is the triangular number.

The common mistake is tread × riser × width × steps — for 5 steps that gives only one third of the concrete actually needed.

A worked example: 5 steps, 11 in tread, 7 in riser, 4 ft wide

  • Tread: 11 in = 0.917 ft
  • Riser: 7 in = 0.583 ft
  • Triangular number: 5 × 6 ÷ 2 = 15
  • Volume: 0.917 × 0.583 × 15 × 4 = 32.08 cubic feet
  • Cubic yards: 32.08 ÷ 27 = 1.19 cubic yards
  • With 10% waste: 1.31 cubic yards
  • Bags: 54 × 80 lb bags, 59 with waste

A comfortable step

A comfortable step is a 7 in riser with an 11 in tread — keep every step identical, or people will trip.

Waste and landings

Add 10% waste for solid steps (15% if the ground is rough or the forms are old). This covers solid steps only, not landings — calculate a landing separately as a slab and add the two volumes.

If you would rather not do the arithmetic by hand, run the same numbers through a stairs concrete calculator — it handles any step count and size in one step.

Comments